Brand:Cisco

Cisco WAP150 Wireless-AC Dual Radio Access Point with PoE

269.00 269.00 269.0 AUD

269.00


NHCWAP150


 RAM installed (max)

256 MB

Flash memory installed (max)

128 MB

Connectivity technology

Wireless AC

Data transfer rate

867 + 300 Mbps

Data link protocol

IEEE 802.11a/b/g/n, IEEE 802.11ac

DFS support

Yes

Remote management protocol

SNMPv3, HTTP, HTTPS

Network and transport protocol

DHCP, Bonjour

Frequency band

2.4 GHz and 5 GHz

Number of radios

2

Multiple input, multiple output (MIMO)

2 x 2:2 for 2.4 Ghz and 5 GHz

Maximum active WLAN clients

16 per radio

Number of access points supported per cluster

4

Status indicators

One LED power, WLAN, LAN

Features

DHCP support, load balancing, VLAN support, syslog support, email alert, IPv6, Wireless Distribution System (WDS), firmware upgradable, wall mountable, Spanning Tree Protocol (STP), Wi-Fi Multimedia (WMM), access control list (ACL), quality of service (QoS), RADIUS, multiple SSID, wireless bridge mode, Wireless Scheduler, IPv4, rogue access point detection, captive portal, band steering, Single Point Setup

Compliant standards

IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11a/b/d/e/g/i/n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1X, IEEE 802.11ac

Antenna

4 x internal PIFA

Gain level

3.61 dBi at 2.4 GHz

3.85 dBi at 5 Ghz

Interfaces

1 Ethernet 10BASE-T/100BASE-TX/1000BASE-T

RJ-45

Cables included

1 network cable

Mounting kit

Included

Compliant standards

FCC Class B certified, IC

Power over Ethernet (PoE) supported

802.3af/at

Voltage required

DC 12V/1.5A